background image

After you install the module, determine the type of controller you want to use. For more
information about cabling the module to a controller, refer to 

NI E Series or M Series

10-Pin

Rear Connector

, or 

50-Pin Rear Connector

.

Related Information

Refer to the Read Me First: NI-DAQmx and DAQ Device Installation Guide if you are

installing an NI M Series device.

Refer to the NI Digital Multimeters Getting Started Guide if you are installing an NI 407x.

NI E Series or M Series

Refer to the following figure and complete the following steps to cable the switch controller to
the switch module. Notice that an NI E Series or M Series device can directly cable only to an
NI SCXI switch module with a 50-pin rear connector.

Figure 3.

 Cabling an NI E Series or M Series Device to an NI SCXI Switch Module

1

2

4

5

3

1. NI SCXI Switch Module with a 50-Pin Rear

Connector

2. NI SCXI-1000/1001 or NI PXI-1010/1050 Chassis
3. NI SCXI-1349 Cable Adapter

4. NI SH6868 Cable
5. NI E Series or M Series Device

1. Attach the NI SCXI-1349 cable adapter to the rear of the NI SCXI switch module.
2. Screw the cable adapter to the chassis mounting rail.
3. Connect one end of the NI SH6868 cable to the NI SCXI-1349 cable adapter and the

other end to the NI M Series device.

NI Switches Getting Started Guide

 | © National Instruments | 9

Summary of Contents for SCXI-1175
























Reviews: