background image

Visit 

ni.com/register

 to register your National Instruments product. Product registration

facilitates technical support and ensures that you receive important information updates from
NI.

A Declaration of Conformity (DoC) is our claim of compliance with the Council of the
European Communities using the manufacturer’s declaration of conformity. This system
affords the user protection for electromagnetic compatibility (EMC) and product safety. You
can obtain the DoC for your product by visiting 

ni.com/certification

. If your product supports

calibration, you can obtain the calibration certificate for your product at 

ni.com/calibration

.

National Instruments corporate headquarters is located at 11500 North Mopac Expressway,
Austin, Texas, 78759-3504. National Instruments also has offices located around the world.
For telephone support in the United States, create your service request at 

ni.com/support

 or

dial 512 795 8248. For telephone support outside the United States, visit the 

Worldwide

Offices

 section of 

ni.com/niglobal

 to access the branch office websites, which provide up-to-

date contact information, support phone numbers, email addresses, and current events.

NI Switches Getting Started Guide

 | © National Instruments | 21

Summary of Contents for SCXI-1175
























Reviews: