![background image](http://html.mh-extra.com/html/national-instruments/scxi-1160/scxi-1160_user-manual_3474635031.webp)
Configuration and Installation Chapter 2
SCXI-1160 User Manual 2-15 © National Instruments Corporation
SCXI-1324 Installation. To connect the terminal block to the SCXI-1160 front connector, follow
these steps:
1. Connect the SCXI-1160 front connector to its mating connector on the terminal block.
2. Make sure that the SCXI-1160 top and bottom thumbscrews do not obstruct the rear panel of
the terminal block.
3. Tighten the top and bottom screws on the back of the terminal block to hold it securely in
place.
Rear Signal Connector
Note: If you will use the SCXI-1160 with a National Instruments data acquisition board and
cable assembly, you do not need to read the remainder of this chapter. If you will also
use the SCXI-1180 feedthrough panel, the SCXI-1343 rear screw terminal adapter, or the
SCXI-1351 one-slot cable extender with the SCXI-1160, read this section.