Chapter 2
Installation and Configuration
©
National Instruments Corporation
2-5
Figure 2-2.
Connecting an SCXI Chassis to a DAQ Device
Connecting the SCXI-1104/C to a DAQ Device for Multiplexed Scanning
in a PXI Combination Chassis
This configuration allows you to multiplex all 32 channels of your
SCXI-1104/C into a single channel of your DAQ device in a combination
PXI chassis. You need the following items for this installation:
•
PXI combination chassis with the SCXI modules installed
•
National Instruments PXI-MIO DAQ device installed in the right-most
slot
Consult your PXI chassis documentation, other SCXI module
documentation, and DAQ device documentation for additional instructions
and warnings. You should have already installed your SCXI-1104/C
module and any other SCXI modules in the chassis according to their
1
DAQ Device
2
Cable
3
Cable Adapter
4
SCXI Chassis Power Switch
®
3
2
1
4
