©
National Instruments Corporation
I-1
Index
Numbers
+5 V signal (table), 3-3
A
accessories for connecting signals, 3-1, B-4
Address Handler, 5-2
amplifier characteristics, A-2
analog bus switches, 5-3
analog circuitry, 5-3
analog input
input characteristics, A-1
signal connections, 3-3 to 3-4
analog input channels, 5-3
auto-detection of modules, 2-7
B
block diagram of SCXI-1104/C, 5-1
C
C language, and low-level DAQ functions,
4-4 to 4-5
cables, custom (table), 1-3
calibration, 6-1 to 6-3
equipment requirements, 6-1 to 6-2
gain and offset calibration, 6-2 to 6-3
overview, 6-1
CGND signal (table), 3-3
CH31+ through CH0+ signals (table), 3-3
CH31- through CH0- signals (table), 3-3
channel addressing, 4-2 to 4-4
LabVIEW and SCXI channel string,
4-2 to 4-3
LabVIEW and virtual channel string,
4-3 to 4-4
Channel Register, 5-3
channels, onboard, questions about, B-2
common questions, B-1 to B-4
configuration, 2-6 to 2-11
auto-detecting modules, 2-7
configuration/reconfiguration, 2-9
manually adding modules, 2-8
SCXI-1200 device for use with
SCXI-1104/C, B-2
self-test verification, 2-10
steps for, 2-6 to 2-7
troubleshooting self-test verification,
2-10 to 2-11, B-2
Configuration Register, 5-3
connecting SCXI-1104/C to DAQ device
in PXI combination chassis, 2-5 to 2-6
in SCXI chassis, 2-3 to 2-5
connectors. See front signal connector; rear
signal connector.
conventions used in manual, ix-x
custom cables (table), 1-3
D
DAQ device
connecting with SCXI-1104/C for
multiplexed scanning
in PXI combination chassis, 2-5 to 2-6
in SCXI chassis, 2-3 to 2-5
unavailable digital lines, B-3
DAQD*/A signal (table), 3-5, 3-6
DGND signal (table), 3-5
diagnostic resources, online, C-1
digital control circuitry, 5-2 to 5-3
digital signals
digital signals for rear connector, 3-6
