background image

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. 
Refer to the 

Terms of Use

 section on 

ni.com/legal

 for more information about National 

Instruments trademarks. Other product and company names mentioned herein are trademarks or trade 
names of their respective companies. For patents covering National Instruments products, refer to the 
appropriate location: 

Help»Patents

 in your software, the 

patents.txt

 file on your CD, or 

ni.com/patents

.

© 2000–2005 National Instruments Corporation. All rights reserved.

373743B-01

Feb05

Free Technical Support

—All registered users receive free Basic 

Service, which includes access to hundreds of Application 
Engineers worldwide in the NI Developer Exchange at 

ni.com/exchange

. National Instruments Application Engineers 

make sure every question receives an answer.

For information about other technical support options in your 
area, visit 

ni.com/services

 or contact your local office at 

ni.com/contact

Training and Certification

—Visit 

ni.com/training

 for 

self-paced training, eLearning virtual classrooms, interactive CDs, 
and Certification program information. You also can register for 
instructor-led, hands-on courses at locations around the world.

System Integration

—If you have time constraints, limited in-house 

technical resources, or other project challenges, National Instruments 
Alliance Partner members can help. To learn more, call your local 
NI office or visit 

ni.com/alliance

.

Declaration of Conformity (DoC)

—A DoC is our claim of 

compliance with the Council of the European Communities using 
the manufacturer’s declaration of conformity. This system affords 
the user protection for electronic compatibility (EMC) and product 
safety. You can obtain the DoC for your product by visiting 

ni.com/certification

.

Calibration Certificate

—If your product supports calibration, 

you can obtain the calibration certificate for your product at 

ni.com/calibration

.

National Instruments corporate headquarters is located at 11500 North 
Mopac Expressway, Austin, Texas, 78759-3504. Visit the Worldwide 
Offices section at 

ni.com/niglobal

 to access the branch office Web 

sites, which provide up-to-date contact information, support phone 
numbers, email addresses, and current events.

Summary of Contents for SCC Series





































Reviews: