![background image](http://html2.mh-extra.com/html/national-instruments/scc-series/scc-series_quick-start-manual_3436164029.webp)
©
National Instruments Corporation
29
SCC Quick Start Guide
3.
Select the sensor to use, if applicable for that measurement.
4.
Select the physical channel(s) from which to create local virtual
channels in the task. Alternatively, you can add existing global virtual
channels to the task or copy information from an existing global virtual
channels to the local virtual channel.
If your system is configured with a TEDS sensor, click the
TEDS
Channels
tab. Select the physical channel(s). The DAQ Assistant
imports the setting from the sensor and creates the task.
Click
Next
.
5.
If you launched the DAQ Assistant from MAX, type the new task
name. Click
Finish
.
SCC-SG02
Analog Input»Strain Gage
Strain Configuration = Quarter Bridge I
Gage Resistance = 350
Ω
Gage Factor = #
SCC-SG03
Analog Input»Strain Gage
Strain Configuration = Half Bridge I
Gage Resistance = #
Gage Factor = #
Poisson Ratio = #
SCC-SG04
Analog Input»Strain Gage
Strain Configuration = Full Bridge I
Gage Resistance = #
Gage Factor = #
Analog Input»Custom Voltage
with Excitation
Max/Min = ±100 mV
Bridge Type = Full Bridge
Excitation Source = Internal
Excitation Value = 2.5 V
SCC-SG24
Analog Input»Strain Gage
Strain Configuration = Full Bridge I
Excitation Value = 10 V
Gage Resistance = #
Gage Factor = #
Analog Input»Custom Voltage
with Excitation
Max/Min = ±100 mV
Bridge Type = Full Bridge
Excitation Source = Internal
Excitation Value = 10 V
SCC-SG11
Digital Output
Use default
SCC-TC01
Analog Input»Temperature»
Thermocouple
CJC Source = Built In
Thermocouple Type = #
SCC-TC02
Analog Input»Temperature»
Thermocouple
CJC Source = Built In
Thermocouple Type = #
1
Use default value for parameters not specified in the table.
# Value is based on sensor specification.
Table 4.
SCC Module and Corresponding NI-DAQmx Measurement Type (Continued)
SCC Module
Recommended NI-DAQmx
Measurement Type
Recommended
Parameter Settings
1