SCC-68 User Guide
10
ni.com
Using the SCC-68 with the NI 6025E, NI 6033E, or NI 6071E
To use the SCC-68 with the NI 6025E, NI 6033E, or NI 6071E, complete
the following steps:
1.
Attach the SCC-68 to the DAQ device using an SH1006868 cable. This
cable has two 68-pin connectors labeled
MIO 16
and
Extended I/O
.
Connect the
MIO 16
connector to the SCC-68. Refer to Figure 5.
Figure 5.
Connecting a 100-Pin DAQ Device to an SCC-68 Connector Block and
Another Terminal Block
You cannot use the Extended I/O connector with an SCC-68. Use
another terminal block such as the SCB-68 or CB-68LPR with the
Extended I/O connector.
2.
Refer to Figure 23 in the
Quick Reference Guides
section for the quick
reference guide for the SCC-68 connected to the E Series DAQ device.
The guide shows the pin assignments of the SCC-68 and other useful
information. Attach a copy of this pinout to the top of the SCC-68
enclosure as shown in Figure 1.
E Series
100-Pin Device
SH1006868 Cable
SCC-68
Extended
I/O Connector
MIO Connector
SCB-68 or
Other
Terminal
Block