© National Instruments
|
2-15
Link L
0
p Enable
Select
Enable
for Link L0p support. The options are
Enable
,
Auto
, and
Disable
.
Link L1 Enable
Select
Enable
for Link L1 support. The options are
Enable
,
Auto
, and
Disable
.
Isoc Mode
Select
Enabled
for Isochronous support to meet QoS (Quality of Service) requirements.
This feature is especially important for Virtualization Technology. The options are
Enable
and
Disable
.
Memory Configuration
Enforce POR
Select
Enable
to enforce POR restrictions for DDR4 frequency and voltage programming.
The options are
Enabled
and
Disabled
.
Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory modules.
The options are
Auto, 1333, 1400, 1600, 1800, 1867, 2000, 2133, 2200, 2400, 2600, 2667,
and
Reserved
(Do not select Reserved).
ECC Support
Select
Enable
to enable Error Checking & Correction (ECC) support for onboard memory
modules. The options are
Auto
,
Enable
and
Disable
.
Data Scrambling
Select
Enabled
to enable data scrambling to enhance system performance and data integrity.
The options are
Auto
,
Disabled
and
Enabled
.
Enable ADR
Select
Enabled
for ADR (Automatic Diagnostic Repository) support to enhance memory
performance. The options are
Enabled
and
Disabled
.
DRAM RAPL (Running Average Power Limit) Baseline
Use this feature to set the run-time power-limit baseline for DRAM modules. The options are
Disable, DRAM RAPL Mode 0,
and
DRAM RAPL Mode 1
.
