National Instruments RMC-8356 User Manual Download

Page: 84 / 113

B-15

Overheat (OH)/Fan Fail

Connect an LED cable to pins 7 and 8 of JF1 to use the Overheat/Fan Fail LED connections.

NIC1/NIC2 (LAN1/LAN2)

The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins 11
and 12 of JF1, and the LED connection for LAN Port 2 is on Pins 9 and 10. Attach the NIC LED
cables here to display network activity.

HDD LED

The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable here to indicate
the status of all HDD-related activity.

Power LED

The Power LED connection is located on pins 15 and 16 of JF1.

Table B-27.

OH/Fan Fail Indicator Status

Status

Definition

Off

Normal

Overheat

Flashing

Fan Fail

Table B-28.

LAN1/LAN2 LED Pin Definitions (JF1)

Pin

Definition

9/11

3.3 V Stby

10/12

LAN LED Active

Table B-29.

HDD LED Pin Definitions (JF1)

Pin

Definition

3.3 V Stby

HD Active

Table B-30.

Power LED Pin Definitions (JF1)

Pin

Definition

3.3 V Standby

Power LED

Summary of Contents for RMC-8356


















































































































Search results

Summary of Contents for RMC-8356

Reviews:

Related manuals for RMC-8356

Brands by name

Popular brands

National Instruments RMC-8356, User Manual

Search results

Summary of Contents for RMC-8356

Reviews:

Related manuals for RMC-8356

Brands by name

Popular brands