National Instruments RMC-8356 User Manual Download Page 14

Page: 14 / 113

1-5

RMC-8356 User Manual

Figure 1-2.

Rear View of the RMC-8356

The rear of the chassis includes the following features:
•

Power Supply

—350 W Platinum Level Power Supply.

•

I/O Back Panel

—Rear I/O ports.

•

Expansion Card Slot

—Slot for one expansion card (requires pre-installed riser card).

•

Rack Ear Brackets

—Attaches server chassis to the rack.

Figure 1-3.

Control Panel Features

The control panel includes the following LEDs:
•

Overheat/Fan Fail LED

—Flash indicates a fan failure. Solid indicates overheat condition.

•

NIC2 LED

—Flash when there is activity on LAN port 2.

•

NIC1 LED

—Flash when there is activity on LAN port 1.

•

HDD LED

—Flash when there is hard drive activity.

•

Power LED

—Solid when system is operating.

•

Reset Button

—Reboots the system.

•

Power Button

—Removes the main power but maintains standby power. To perform many

maintenance tasks, you

must

also unplug system before servicing.

Power Supply

I/O Back Panel

Expansion Card Slot

Rack Ear Brackets

Overheat/Fan Fail LED

NIC2 LED

NIC1 LED

HDD LED

Power LED

Reset Button

Power Button

Summary of Contents for RMC-8356


















































































































Search results

Summary of Contents for RMC-8356

Reviews:

Related manuals for RMC-8356

Brands by name

Popular brands

National Instruments RMC-8356, User Manual

Search results

Summary of Contents for RMC-8356

Reviews:

Related manuals for RMC-8356

Brands by name

Popular brands