National Instruments PXIe-5113 User Manual Download

Page: 1 / 28

CALIBRATION PROCEDURE

PXIe-5113

This document contains the verification and adjustment procedures for the PXIe-5113. Refer
to

for more information about calibration solutions.

Contents

Zeroing the Power Sensor................................................................................................. 6
Characterizing Power Splitter Amplitude Balance and Loss............................................6

Verification..............................................................................................................................10

Verifying DC Accuracy...................................................................................................11
Verifying 50 Ω Bandwidth.............................................................................................. 18

Adjustment.............................................................................................................................. 25

Adjusting the PXIe-5113.................................................................................................25
Adjusting 1 MΩ Compensation Attenuator.................................................................... 25
Adjusting 1 MΩ DC Reference.......................................................................................26
Adjusting 50 Ω DC Reference........................................................................................ 27

Required Software

Calibrating the PXIe-5113 requires you to install the following software on the calibration
system:
•

Compatible version of the NI-SCOPE instrument driver. NI recommends you use the
latest version of NI-SCOPE for external calibration.

•

Supported application development environment (ADE): LabVIEW

You can download all required software from

ni.com/downloads

Summary of Contents for PXIe-5113





























Search results

Summary of Contents for PXIe-5113

Reviews:

Related manuals for PXIe-5113

Brands by name

Popular brands

National Instruments PXIe-5113, Calibration Procedure

Search results

Summary of Contents for PXIe-5113

Reviews:

Related manuals for PXIe-5113

Brands by name

Popular brands