©
National Instruments Corporation
9
NI PXIe-4353 and TB-4353 Terminal Block Installation Guide
Tip
Using an NI-DAQmx simulated device, you can test NI-DAQmx applications without installing
section for instructions for creating NI-DAQmx
simulated devices.
3.
Right-click the module name and select
Self-Test
. When the self-test completes, a verification
message appears. If an error occurs, refer to
ni.com/support/daqmx
.
For information about sensors, go to
ni.com/sensors
.
Step 6. Run Test Panels
1.
In MAX, expand
Devices and Interfaces»NI-DAQmx Devices
.
2.
Right-click the device, and select
Test Panels
.
3.
Click
Start
to test device functions, or
Help
for operating instructions.
To troubleshoot errors, refer to the
NI-DAQmx Help
, or go to
ni.com/support
.
Step 7. Take an NI-DAQmx Measurement
NI-DAQmx Channels and Tasks
Refer to the
NI-DAQmx Help
for complete information about channels and tasks.
Use the DAQ Assistant to configure virtual channels and tasks in MAX or in your application.
