Figure 12. Installing a PXI Express System Controller
NI PXIe-1
086
4
3
2
1
1. Controller Front Panel Mounting Screws (4x)
2. NI PXI Express System Controller
3. Injector/Ejector Handle
4. PXIe-1086DC Chassis
3.
When you begin to feel resistance, pull up on the injector/ejector handle to seat the
system controller fully into the chassis frame. Secure the system controller front panel to
the chassis using the system controller front panel mounting screws.
4.
Connect the keyboard, mouse, and monitor to the appropriate connectors. Connect
devices to ports as required by your system configuration.
5.
Power on the chassis. Verify that the system controller boots. If the system controller does
not boot, refer to your system controller user manual.
The following figure shows a PXI Express system controller installed in the system controller
slot of a PXIe-1086DC chassis. You can place CompactPCI, CompactPCI Express, PXI, or
PXI Express modules in other slots depending on the slot type.
PXIe-1086DC User Manual and Specifications
|
© National Instruments
|
19
