background image

Troubleshooting

If an issue persists after you complete a troubleshooting procedure, contact NI technical
support or visit 

ni.com/support

.

What Should I Do if the NI 5624R Doesn't Appear in
MAX?

1.

In the MAX Configuration pane, click 

Devices and Interfaces

.

2.

Expand the 

Chassis

 tree to see the list of installed devices, and press <F5> to refresh the

list.

3.

If the module is still not listed, power off the system, ensure that all hardware is correctly
installed, and restart the system.

4.

Navigate to the Device Manager.

Option

Description

 

 

Windows 7

Select 

Start

»

Control Panel

»

Device Manager

.

Windows Vista

Select 

Start

»

Control Panel

»

System and Maintenance

»

Device

Manager

.

Windows XP

Select 

Start

»

Control Panel

»

System

»

Hardware

»

Device Manager

.

5.

If you are using a PXI controller, verify that a 

National Instruments

 entry appears in the

system device list. Reinstall NI LabVIEW Instrument Design Libraries for IF Digitizers
and the device if error conditions appear in the list. If you are using a MXI controller,
right-click 

PCI-to-PCI Bridge

, and select 

Properties

 from the shortcut menu to verify

that the bridge is enabled.

What Should I Do if the Module Fails the Self-Test or
Self-Calibration?

1.

Restart the system.

2.

Launch MAX, and perform the self-test or self-calibration again.

3.

Power off the chassis.

4.

Reinstall the failed module in a different slot.

5.

Power on the chassis.

6.

Perform the self-test again.

12

  | 

ni.com

  | 

NI PXIe-5624R Getting Started Guide

Summary of Contents for NI PXIe-5624R















Reviews: