background image

Getting Started with the NI PCIe-1429 and 1430

8

ni.com

Serial Interface

Baud rates supported..............................................300, 600, 1200, 1800, 2000, 2400, 3600, 4800, 7200, 

or 9600 bps; 19.2, 38.4, 56, or 115.2 kbps

Power Requirements

Voltage ...................................................................+12 V (1.25 A)

1

Physical Characteristics

Dimensions ............................................................10.7 cm

×

17.5 cm (4.2 in.

×

6.9 in.)

Weight ....................................................................205 g (7.23 oz)

Environment

The NI 1429 and NI 1430 are intended for indoor use only.

Operating temperature ........................................... 0 °C to 40 °C

2

Storage temperature ...............................................–20 °C to 70 °C

Relative humidity...................................................5% to 90%, noncondensing

Pollution Degree ....................................................2

Approved at altitudes up to 2,000 m.

Safety

This product is designed to meet the requirements of the following standards of safety for electrical 
equipment for measurement, control, and laboratory use:

IEC 61010-1, EN 61010-1 

UL 61010-1, CSA 61010-1

Note

For UL and other safety considerations, refer to the product label, or visit 

ni.com/certification

, search by model number or product line, and click the appropriate 

link in the Certification column. 

Electromagnetic Compatibility

This product is designed to meet the requirements of the following standards of EMC for electrical 
equipment for measurement, control, and laboratory use:

EN 61326 EMC requirements; Minimum Immunity

EN 55011 Emissions; Group 1, Class A

CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A

Note

 For EMC compliance, operate this device according to product documentation.

1   

If you are using special firmware add-ons, this value is subject to change. Consult your firmware upgrade documentation for 

specific requirements.

2   

This temperature value was determined through testing the device in a Dell Precision 470 workstation with two adjacent 
plug-in devices each dissipating 11.6 W.

Summary of Contents for NI PCIe-1429











Reviews: