![background image](http://html1.mh-extra.com/html/national-instruments/ni-dcm-23-series/ni-dcm-23-series_getting-started-manual_3583134010.webp)
10
|
ni.com
|
NI DCM-23XX Getting Started Guide
Caution
Any files, including calibrations, present on the DCM during formatting
will be lost. Prior to formatting, any files present on the DCM must be backed up in
order to be saved. Files may be copied from the DCM by WebDAV file transfer.
a.
Select
Format Disk
.
Tip
You must log in if you set a system password.
b.
Select
Attempt to restart into safe mode
.
c.
Select the desired option to manage network adapter settings.
d.
Click
Format
.
e.
Wait for the formatting process to finish, then click
OK
.
2.
In MAX, expand your system under Remote Systems.
a.
Right-click
Software
.
b.
Select
Add/Remove Software
to launch the LabVIEW Real-Time Software Wizard.
Tip
You must log in if you set a system password.
c.
Select the recommended software set for your LabVIEW and NI-RIO Device Drivers
versions.
d.
Click
Next
.
e.
Verify that the summary of software to install is correct.
f.
Click
Next
.
g.
Click
Finish
when the installation is complete.
3.
To install NI VeriStand or NI SCM on the target, continue with the following steps.
a.
In MAX, right-click
Software
as before
.
b.
Select
Add/Remove Software
to launch the LabVIEW Real-Time Software Wizard.
Tip
You must log in if you set a system password.
c.
Select
Custom software installation
.
d.
Click
Yes
.
e.
Select any additional software to install (VeriStand Engine, SCM, etc.)
f.
Click
Next
.
g.
Verify that the summary of software to install is correct.
h.
Click
Next.
4.
Click
Finish
when the installation is complete.
Launching DCM DSI
Complete the following steps to launch and begin using DCM DSI.
Summary of Contents for NI DCM-23 Series
Page 15: ......