USB 3.1 Type-C Host Port
The USB host port on the cRIO-905x support common USB mass-storage devices such as
USB Flash drives, USB-to-IDE adapters, keyboards, mice, and USB cameras.
The following NI USB Type-C adapters are available for the cRIO-905
x
.
Table 2. NI USB Type-C Adapters for cRIO-905x
Cable
Length Part Number
USB Cable with Retention, Type-C Male to Type-A Female, USB
3.1, 3A
0.5 m
143555-0R5
The following NI cables with retention are available for use with the cRIO-905
x
.
Table 3. NI USB Cables with Retention
Cable
Length Part Number
USB Cable with Retention, Type-C Male to Type-C Male, USB 3.1,
3A
0.3 m
143556-0R3
1 m
143556-01
2 m
143556-02
PFI 0
The Programmable Function Interface (PFI) terminal is a SMB connector. You can configure
the PFI terminal as a timing input or timing output signal for AI, AO, DI, DO, or counter/timer
functions.
Note
The PFI 0 terminal can only be used while the module is in the Real Time
programmatic mode. For more information about programming modes, refer to
Choosing Your Programming Mode
.
Power Connector
The cRIO-905
x
has a power connector to which you can connect a power supply.
Table 4. Power Connector Pinout
Pinout
Pin
Description
V
C
V
Power input
C
Common
NI cRIO-905x User Manual
|
© National Instruments
|
7