Type-C Device Port with Console Out. NI recommends using the USB 2.0 Type-C
Device Port with Console Out for configuration, debugging, and maintenance.
Connecting the cRIO-905x to the Host Computer Using
USB
Complete the following steps to connect the cRIO-905
x
to the host computer using the USB
2.0 Type-C Device Port with Console Out.
1.
Power on the host computer.
2.
Connect the cRIO-905
x
to the host computer using the USB Type C to Type A cable
(included in kit), inserting the USB Type-C connector into the USB 2.0 Type-C Device
Port with Console Out.
3.
Connect the other end of the USB cable (Type-A) to the host computer.
Note
The device driver software automatically detects the cRIO-905
x
. If the
device driver software does not detect the cRIO-905
x
, verify that you installed
the appropriate NI software in the correct order on the host computer as
described in
Installing Software on the Host Computer
in the
NI cRIO-905x
Getting Started Guide
.
4.
Select
Configure and install software to this device
.
NI cRIO-905x User Manual
|
© National Instruments
|
3
