manualshive.com logo in svg

National Instruments NI cRIO-9036, User Manual, Page: 2 / 40

Share
Download
National Instruments NI cRIO-9036 User Manual Download Page 2

Contents

Configuring the cRIO-9036...................................................................................................... 2

Connecting the cRIO-9036 to the Host Computer or Network Using Ethernet............... 3
Configuring Startup Options.............................................................................................4

cRIO-9036 Features.................................................................................................................. 6

Ports and Connectors........................................................................................................ 6
Buttons............................................................................................................................ 14
LEDs............................................................................................................................... 16
Chassis Grounding Screw............................................................................................... 19
Internal Real-Time Clock................................................................................................20
CMOS Battery.................................................................................................................20
File System......................................................................................................................20

Installing the Module Immobilization Accessory...................................................................21

Module Immobilization Accessory Dimensions.............................................................22

Mounting the Device...............................................................................................................23

Dimensions......................................................................................................................24
Mounting Requirements..................................................................................................24
Ambient Temperature......................................................................................................25
Mounting the Device Directly on a Flat Surface............................................................ 26
Mounting the cRIO-9036 on a Panel.............................................................................. 28
Mounting the cRIO-9036 on a DIN Rail........................................................................ 29
Mounting the Device on a Rack......................................................................................31
Mounting the Device on a Desktop.................................................................................31

BIOS Configuration................................................................................................................ 32

Resetting the System CMOS and BIOS Settings............................................................32
Power-On Self Test Warning Messages.......................................................................... 33
BIOS Setup Utility.......................................................................................................... 33
Main Setup Menu............................................................................................................34
Advanced Setup Menu.................................................................................................... 35
Boot Setup Menu............................................................................................................ 36
Save & Exit Menu...........................................................................................................38

Worldwide Support and Services............................................................................................ 39

Configuring the cRIO-9036

You can connect the cRIO-9036 to a host computer or network and configure the startup
options using the USB device port or the RJ-45 Gigabit Ethernet port 1 or port 2.

Tip

 

Refer to the getting started guide on 

ni.com/manuals

 for basic configuration

instructions and information about connecting to a host computer using the USB
device port. NI recommends using the USB device port for configuration, debug,
and maintenance.

2

  | 

ni.com

  | 

NI cRIO-9036 User Manual

Summary of Contents for NI cRIO-9036









































Reviews:

No comments