NI 9792 WSN Real-Time Gateway User Guide and Specifications
10
ni.com
Attaching to the NI WSN-3282 DIN Rail
Caution
Power off the device before mounting it to the DIN rail.
The NI WSN-3282 DIN rail kit, NI part number 781074-01, contains one clip for mounting the device
on a standard 35 mm DIN rail. To mount the device on a DIN rail, complete the following steps:
1.
Fasten the DIN rail clip to the device using a number 1 Phillips screwdriver and four 4-40 machine
screws. The screws are included in the DIN rail kit.
2.
Make sure the DIN rail kit is installed as shown in Figure 6, with the larger lip of the DIN rail
positioned up.
Note
Use 4-40 (finer thread) screw to affix the DIN rail clip to the device.
Figure 6.
NI 9792 DIN Rail Installation
Figure 7.
DIN Rail Installation Shown without the NI 9792