©
National Instruments Corporation
11
NI 9792 WSN Real-Time User Guide and Specifications
Attaching the NI WSN-3283 Panel Mount Plate
The NI WSN-3283 panel mount kit, NI part number 781075-01, contains a plate for mounting the device
to a panel. To mount the device, complete the following steps:
1.
Fasten the plate to the device using a number 1 Phillips screwdriver and 4-40 machine screws, as
shown in Figure 8. The screws are included in the NI WSN-3283 panel mount kit.
Figure 8.
Mounting the NI 9792 to the Panel Mount Plate
2.
Attach the device and attached plate to a wall or other surface using four to six number 8 or M4
screws. Refer to Figure 5 for the mounting hole template.
Setting Up the NI 9792 Device
Complete the following steps to prepare the NI 9792 device for use:
1.
Before connecting the hardware, install NI LabVIEW and the NI-WSN driver software. You must
be an Administrator to install NI software and devices on your computer. The NI-WSN driver
software is on the software installation disc included with your device and is available for download
at
ni.com/support
. You must have NI LabVIEW 2009 SP1 (32-bit) or later, NI LabVIEW
Real-Time 2009 SP1 (32-bit) or later, and NI-WSN 1.1 and NI MAX installed to use the NI 9792.
Refer to the instructions included with your NI LabVIEW software to install NI LabVIEW.
Once NI LabVIEW is installed, complete the following steps:
2.
Close all other applications.
