©
National Instruments Corporation
35
NI 9792 WSN Real-Time User Guide and Specifications
Online Product Certification
Note
Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance
information. To obtain product certifications and the DoC for this product, visit
ni.com/
certification
, search by model number or product line, and click the appropriate link in the
Certification column.
Shock and Vibration
To meet these specifications for shock and vibration, you must panel mount or wall mount the WSN
system, affix ferrules to the ends of all terminal wires, install a strain relief on the power cable, and
install tie wraps on the Ethernet and power cables. You can order the NI 9979, a strain-relief kit for the
power cable, from National Instruments. The kit is NI part number 196939-01.
Operating vibration, random
(IEC 60068-2-64)...................................................5 g
rms
, 10 to 500 Hz
Operating shock
(IEC 60068-2-27)...................................................30 g, 11 ms half sine,
50 g, 3 ms half sine,
18 shocks at 6 orientations
Operating vibration, sinusoidal
(IEC 60068-2-6).....................................................5 g, 10 to 500 Hz
Environmental
Operating temperature
(IEC-60068-2-1 and IEC-60068-2-2) ....................–40 to 70 °C
Storage temperature
(IEC-60068-2-1 and IEC-60068-2-2) ....................–40 to 85 °C
Ingress protection...................................................IP 40
Operating humidity (IEC-60068-2-56) ..................10 to 90% RH, noncondensing
Storage humidity (IEC-60068-2-56)......................5 to 95% RH, noncondensing
Pollution Degree (IEC 60664) ...............................2
Maximum altitude..................................................2,000 m
Indoor use only
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible manner. NI
recognizes that eliminating certain hazardous substances from our products is beneficial to the
environment and to NI customers.
For additional environmental information, refer to the
NI and the Environment
Web page at
ni.com/
environment
. This page contains the environmental regulations and directives with which
NI complies, as well as other environmental information not included in this document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers
At the end of the product life cycle, all products must be sent to a WEEE recycling
center. For more information about WEEE recycling centers, National Instruments WEEE initiatives,
and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit
ni.com/environment/weee
.
