Appendix B Error Codes
© National Instruments Corporation
B-17
Measure Data Acquisition User Manual
-10844
underWriteErr
New data was not written to the output
transfer buffer before the driver
attempted to transfer data to the
device.
-10845
overFlowErr
Because of system limitations, the
driver could not read data from the
device fast enough to keep up with the
device throughput. The onboard
device memory reported an overflow
error.
-10846
overWriteErr
The driver wrote new data into the
input transfer buffer before the
previously acquired data was read.
-10847
dmaChainingErr
New buffer information was not
available at the time of the DMA
chaining interrupt; DMA transfers will
terminate at the end of the currently
active transfer buffer.
-10848
noDMACountAvailErr
The driver could not obtain a valid
reading from the transfer-count
register in the DMA controller.
-10849
OpenFileError
The configuration file or DSP kernel
file could not be opened.
-10850
closeFileErr
Unable to close a file.
-10851
fileSeekErr
Unable to seek within a file.
-10852
readFileErr
Unable to read from a file.
-10853
writeFileErr
Unable to write to a file.
-10854
miscFileErr
An error occurred accessing a file.
-10855
osUnsupportedError
NI-DAQ does not support the current
operation on this particular version of
the operating system.
-10856
osError
An unexpected error occurred from the
operating system while performing the
given operation.
