Appendix B Error Codes
Measure Data Acquisition User Manual
B-4
© National Instruments Corporation
with the device type.
-10090
badRPGErr
The individual range, polarity, and gain
settings are valid, but the combination is
not allowed.
-10091
badIterationsErr
You have attempted to use an invalid
setting for the iterations parameter. The
iterations value must be 0 or greater.
Your device may be limited to only two
values, zero and one.
-10092
lowScanIntervalError
Some devices require a time gap between
the last sample in a scan and the start of
the next scan. The scan interval you have
specified does not provide a large
enough gap for the device. See the
SCAN_Start function in the language
interface API for an explanation.
-10093
fifoModeError
FIFO mode waveform generation cannot
be used because at least one condition is
not satisfied.
-10100
badPortWidthErr
The requested digital port width is not a
multiple of the hardware port width.
-10120
gpctrBadApplicationError
Invalid application used.
-10121
gpctrBadCtrNumberError
Invalid counterNumber used.
-10122
gpctrBadParamValueError
Invalid paramValue used.
-10123
gpctrBadParamIDError
Invalid paramID used.
-10124
gpctrBadEntityIDError
Invalid entityID used.
-10125
gpctrBadActionError
Invalid action used.
-10200
EEPROMreadError
Unable to read data from EEPROM.
-10201
EEPROMwriteError
Unable to write data to EEPROM.
-10240
noDriverErr
The driver interface could not locate or
open the driver.
-10241
oldDriverErr
One of the driver files or the
configuration utility is out-of-date.
-10242
functionNotFoundErr
The specified function is not located in
the driver.
-10243
DSPconfigFileErr
The driver could not locate or open the
configuration file, or the format of the
configuration file is not compatible with
the currently installed driver.
