5
FP 1000/1001 Quick Start Guide
©
National Instruments Corporation
Install the I/O Module(s)
It does not matter where you install each I/O module, except in the following cases:
•
If you plan to cascade power between any I/O modules using the V and C terminals,
those modules should be grouped together.
•
For more accurate measurements, place thermocouple modules away from heat
sources, including network modules and relay modules.
A. Align slots on module with guide rails on base, and press module onto base until
base latch locks module in place.
B. Repeat for each I/O module.
3
CAUTION
Cascading power defeats isolation.
322731e.qxd 4/4/2003 3:40 PM Page 5