![background image](http://html2.mh-extra.com/html/national-instruments/fieldpoint-fp-1001/fieldpoint-fp-1001_quick-start-manual_3420415017.webp)
17
FP 1000/1001 Quick Start Guide
©
National Instruments Corporation
Environmental
FieldPoint modules are intended for indoor use only. For outdoor use, they must be
installed in a suitable sealed enclosure.
Operating temperature . . . . . . . . . . . –40 to 70
°
C
Storage temperature . . . . . . . . . . . . . –55 to 85
°
C
Humidity . . . . . . . . . . . . . . . . . . . . . . . 10 to 90% RH, noncondensing
Maximum altitude . . . . . . . . . . . . . . . 2,000 m; at higher altitudes the isolation voltage
ratings must be lowered.
Pollution Degree . . . . . . . . . . . . . . . . 2
Safety
The FP-1000/1001 is designed to meet the requirements of the following standards of
safety for electrical equipment for measurement, control, and laboratory use:
•
EN 61010-1, IEC 61010-1
•
UL 3121-1, UL 61010C-1
•
CAN/CSA C22.2 No. 1010.1
Electromagnetic Compatibility
CE, C-Tick and FCC Part 15 (Class A) Compliant
Emissions . . . . . . . . . . . . . . . . . . . . . . EN 55011 Class A at 10 m. FCC Part 15A
above 1 GHz
Immunity . . . . . . . . . . . . . . . . . . . . . . . EN 61326: 1997 + A2: 2001, Table 1
NOTE
For UL and other safety certifications, refer to the product label or to
ni.com
.
NOTE
For EMC compliance, operate this device with shielded cabling.
322731e.qxd 4/4/2003 3:40 PM Page 17