Chapter 4
LabVIEW RT Programming
©
National Instruments Corporation
4-7
cFP-20xx and cFP-BP-x User Manual
Use the
Application Path
and
Launch Application at Boot-up
settings to
automatically launch a built LabVIEW RT application when you start up
the cFP-20
xx
. The LabVIEW RT Engine launches the built application
specified by
Application Path
when you start up the cFP-20
xx
. The
specified path also determines the path and application name that appear
when you target LabVIEW RT to the cFP-20
xx
and create an embedded
LabVIEW RT application. Refer to the
section and the
Launching Embedded Applications at Startup
section for more information about embedding and launching
LabVIEW RT applications on the cFP-20
xx
.
Select
Launch Application at Boot-up
to launch the application specified
in
Application Path
when you start up the cFP-20
xx
. You must first create
the application using the Application Builder before you select this option.
Refer to the
LabVIEW Application Builder Release Notes
and to the
LabVIEW Help
for more information about the Application Builder.
Refer to the
Embedding Applications on the cFP-20xx
information about creating LabVIEW RT applications.
