![background image](http://html1.mh-extra.com/html/national-instruments/er-16/er-16_user-manual_710112063.webp)
Index
© National Instruments Corporation
Index-3
ER-8/16 User Manual
P
PA<7..0> signal
26-pin internal connector (table), B-5
DIO-24 connector (table), B-2
DIO-32 connector (table), B-4
PB<7..0> signal
26-pin internal connector (table), B-5
DIO-24 connector (table), B-2
DIO-32 connector (table), B-4
PC<7..0> signal
26-pin internal connector (table), B-6
DIO-24 connector (table), B-2
DIO-32 connector (table), B-4
PD<7..0> signal
26-pin internal connector (table), B-6
DIO-32 connector (table), B-4
physical specifications, A-2
power LED
description (table), 2-3
parts locator diagram, 2-2
power supply, 3-2 to 3-3
exceeding maximum ratings
(warning), 3-2
requirements for ER-8/16, 3-3
setting up, 3-2 to 3-3
specifications, A-1
power supply switch (SW1)
description (table), 2-3
parts locator diagram, 2-2
power-up conditions, 3-4
R
relay channels
channel 1 relay
description (table), 2-3
parts locator diagram, 2-2
ER-8/16 onboard equivalent circuit
(figure), 4-3
Takamisawa VE series relay technical
data, D-1
theory of operation, 4-3
S
safety information for ER-8/16, 2-4
SC-205X series, using with ER-8/16, 3-8
screw terminals
description (table), 2-3
parts locator diagram, 2-2
setup, 2-1 to 2-7
connecting ER-8/16 to DAQ device, 2-5
to 2-6
ER-8/16 front connector (figure), 2-7
overview, 2-1
parts locator diagram, 2-2
description (table), 2-3
safety information, 2-4
signal connections
channel connections, 3-3 to 3-6
channel isolation, 3-4
contact protection for inductive
loads, 3-4 to 3-6
power-up conditions, 3-4
wire gauge, 3-4
connecting signal lines, 3-6 to 3-7
DAQ system configuration with
ER-8/16, 3-9 to 3-10
front connectors, 3-1 to 3-2
exceeding maximum ratings
(warning), 3-1
for DIO-24 devices, 3-1 to 3-2
for DIO-32 boards, 3-2
internal connectors, 3-7 to 3-8
26-pin internal connectors, B-5
to B-6
daisy chaining the ER-8/16, 3-8
warnings, 3-7
I/O connectors
26-pin internal connectors, B-5
to B-6
DIO-24 connector, B-1 to B-2
DIO-32 connector, B-3 to B-4
power supply, 3-2 to 3-3
using SC-205X series with ER-8/16, 3-8
specifications
channel ratings, A-1
environment, A-2
physical, A-2
power requirements, A-1