Chapter 8
SC-2056
8-2
©
National Instruments Corporation
Figure 8-1.
SC-2056 Parts Locator Diagram
SC-2056 Connection
Connect your SC-2056 to the DAQ device via an SH100100, R1005050, or
SH96-100 cable, available separately. Make this connection with the host
computer or VXI chassis powered off. Connect one end of the cable to the
SC-2056 at either connector J1, J2, or J3. Connect the other end to the
DAQ device installed in your host computer or VXI chassis.
Warning
Do not connect the SC-2056 to a board for which it is not designed. Such
connection can damage the SC-2056 and any or all boards/accessories connected
to the SC-2056 and host computer. National instruments is
NOT
liable for any
damages resulting from incorrect connections.
1
To MIO (or other 64-channel E Series device)
2
To SC-2042, SC-2043, SC-2070, CB-50, or BNC-2080
3
Jumper W1
4
To SC-206
X
Series or 8-Channel SSR Series
5
To 5B Series
6
Serial Number
7
Assembly Number
8
Product Name
1
5
4
3
2
6
7
8
