National Instruments DAQ AT-MIO-16X, User Manual, Page: 311 / 330

Index
AT-MIO-16X User Manual I-2
©
National Instruments Corporation
ADCDSP bit, 4-13
ADCFIFOEF* bit
description, 4-26
DMA operations, 5-41
interrupt programming, 5-43
reading single conversion result, 5-7
servicing data acquisition operation, 5-22
ADCFIFOHF* bit
description, 4-26
DMA operations, 5-41
interrupt programming, 5-43
servicing data acquisition operation, 5-22
ADCFIFOREQ bit, 4-23
ADCREQ bit, 4-16 to 4-18
address decoder circuitry, 3-3
address latches, 3-3
address lines, 3-3
address selection. See base I/O address
selection.
ADIO<0..3> signal
description (table), 2-17, B-4
digital I/O circuitry, 3-24 to 3-25
digital I/O connections, 2-31 to 2-32
ADIO<3..0> bits
Digital Input Register, 4-69
Digital Output Register, 4-70
programming digital I/O circuitry, 5-36
AIGND signal
description (table), 2-17, B-4
differential connections for floating signal
sources, 2-24 to 2-25
AISENSE signal (table), 2-17, B-4
Am9513A Counter/Timer Register Group,
4-64 to 4-67
Am9513A Command Register, 4-66
Am9513A Data Register, 4-65
Am9513A Status Register, 4-67
programming
general considerations, 5-37
resource allocation considerations,
5-1 to 5-2
sample counters, 5-17 to 5-20
sample-interval counter, 5-16 to 5-17
scan interval counter, 5-20 to 5-21
update-interval counter, 5-32 to 5-33
waveform cycle counter, 5-34
waveform cycle interval counter,
5-34 to 5-36
register map, 4-2
resetting after data acquisition operation,
5-23 to 5-24
Am9513A System Timing Controller
data sheet, C-1 to C-40
initializing, 5-3 to 5-4
programming, 5-37
timing I/O circuitry, 3-25 to 3-29
analog data acquisition rates
multiple-channel scanning rates,
A-5 to A-6
single-channel rates, A-4
analog input
calibration, 6-9 to 6-10
overview, 1-2
signal connections, 2-19 to 2-20
analog input circuitry
A/D converter, 3-6
ADC FIFO buffer, 3-7
block diagram, 3-5
calibration, 3-7 to 3-8
clearing, 5-14
input configuration, 3-6 to 3-7
input multiplexers, 3-6
PGIA, 3-7
programming, 5-5 to 5-6
theory of operation, 3-6 to 3-8
analog input configuration, 2-7 to 2-11
available input modes, 2-7 to 2-10
available configurations (table), 2-8
DIFF input, 2-8