National Instruments cRIO-9063, Manual

Page: 15 / 28

Table 13.
User LEDs
LED LED
Color
Description
USER1 Green Use LabVIEW Real-Time to define the USER1 LED with the RT LEDs VI. For
more information about the RT LEDs VI, refer to the LabVIEW Help.
USER
FPGA1
Green Use the LabVIEW FPGA Module and NI-RIO Device Drivers software to define
the USER FPGA1 LED. Use the USER FPGA1 LED to help debug your
application or retrieve application status. Refer to the LabVIEW Help for
information about programming this LED.
Ethernet LED Indicators
The following table lists the Ethernet LED indicators.
Table 14.
Ethernet LED Indicators
LED LED Color LED Pattern Indication
ACT/LINK — Off LAN link not established
Green Solid LAN link established
Flashing Activity on LAN
10/100/1000 Yellow Solid 1,000 Mbit/s data rate selected
Green Solid 100 Mbit/s data rate selected
— Off 10 Mbit/s data rate selected
Chassis Grounding Screw
The cRIO-9063 provides a chassis grounding screw.
Figure 5.
cRIO-9063 Chassis Grounding Screw
1
1. Chassis grounding screw
For EMC compliance, you must connect the cRIO-9063 to earth ground through the
chassis ground screw. Use wire that is 2.1 mm
2
(14 AWG) solid copper wire with a
maximum length of 1.5 m (5 ft). Attach the wire to the earth ground of the electrode
system of the facility.
© National Instruments
15
cRIO-9063 Features