What to Use
■
cRIO-9063
■
Screwdriver, Phillips #2
■
NI panel mounting kit, 779097-01
■
Panel mounting plate
■
M5 or number 10 screw (x4)
What to Do
Complete the following steps to mount the cRIO-9063 on a panel.
1. Align the cRIO-9063 and the panel mounting plate.
2. Fasten the panel mounting plate to the cRIO-9063 using the screwdriver and
M5 or number 10 screws. NI provides these screws with the panel mounting
kit. Tighten the screws to a maximum torque of 1.3 N · m(11.5 lb · in.).
Note
You must use the screws provided with the NI panel mounting
kit because they are the correct depth and thread for the panel
mounting plate.
ni.com
22
cRIO-9063 Features
