USB Device Port
The cRIO-9063 USB device port is intended for device configuration, application
deployment, debugging, and maintenance. For example, you can use the USB
device port to install software or driver updates during field maintenance instead of
interrupting communication on the RJ-45 Ethernet ports.
Caution
Do not hot-swap USB devices while the cRIO-9063 is in a
hazardous location or connected to high voltages. If the cRIO-9063 is not in
a hazardous location, you can connect and disconnect USB devices
without affecting operation.
The following table shows the pinout for the USB device port.
Description
Signal
Pin
Pinout
Pin
Signal
Description
USB data+
D+
3
1
4
2
3
2
D-
USB data-
Ground
GND
4
1
VCC
Cable power (5 V)
The following NI cable is available for the cRIO-9063.
Table 10.
USB Device Port Cable
Cable
Length
Part Number
NI Locking USB Cable
1 m
157788-01
Buttons
The cRIO-9063 provides the following buttons.
© National Instruments
11
cRIO-9063 Features
