©
National Instruments Corporation
17
USB-6525 User Guide and Specifications
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
•
EN 61326 (IEC 61326): Class A emissions; Basic immunity
•
EN 55011 (CISPR 11): Group 1, Class A emissions
•
AS/NZS CISPR 11: Group 1, Class A emissions
•
FCC 47 CFR Part 15B: Class A emissions
•
ICES-001: Class A emissions
Note
For the standards applied to assess the EMC of this product, refer to the
section.
Note
For EMC compliance, operate this product according to the documentation.
CE Compliance
This product meets the essential requirements of applicable European
Directives as follows:
•
2006/95/EC; Low-Voltage Directive (safety)
•
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Online Product Certification
Refer to the product Declaration of Conformity (DoC) for additional
regulatory compliance information. To obtain product certifications and
the DoC for this product, visit
ni.com/certification
, search by model
number or product line, and click the appropriate link in the Certification
column.
Environmental Management
NI is committed to designing and manufacturing products in an
environmentally responsible manner. NI recognizes that eliminating
certain hazardous substances from our products is
beneficial to the
environment and to NI customers.
For additional environmental information, refer to the
NI and the
Environment
Web page at
ni.com/environment
. This page contains the
environmental regulations and directives with which NI complies, as well
as other environmental information not included in this document.