m-sur
e.co
.uk
www.m-sure.co.uk - Allendale Group Ltd, Pindar Road, Hoddesdon, Hertfordshire. EN11 0BZ.
Images & Content ©2020 Allendale Group Limited. E&OE - Specifi cations subject to change without prior notice.
M-SURE Digital Depth Gaug
es
M-SURE Digital Depth Gauges
•
Before using the Digital Depth Gauge for the first time, wipe with a clean cloth ideally soaked with cleaning oil.
•
Digital Depth Gauges are precision measuring instruments. Avoid using excessive force, and treat with care.
•
The fitted battery is intended for the factory test procedure and therefore may not meet the specified battery life.
•
Avoid exposure to all liquids, excessive humidity or temperature.
•
Avoid exposure to bright sunlight.
•
Never apply voltage on any part of this Depth Gauge or electric engrave.
•
Remove the battery if the Gauge is not being used for a long period of time.
•
Never use solvents to clean. Only use a soft cloth with cleaning oil.
Precautions
Digital Depth Gauge
Standard Depth Gauge
Depth Measurement
Add hook thickness to
the displayed value
Add hook thickness to
the displayed value
Depth
1
3
4
8
5
7
6
10
9
2
1
2
3
4
5
6
7
8
1. Frame. 2. Anvil. 3. Spindle. 4. LCD Display.
5. Thimble. 6.Ratchet. 7. SPC Output.
8. Function Buttons.
1
2
3
4
5
7
8
9
10
1. Probe Extension. 2. Function Buttons. 3. LCD Display.
4. Slider. 5. Battery Cover. 6. Locking Screw.
7. Guiding Face. 8. Beam. 9. Instrument Base.
10. Instrument Base Reference Plane.
6
Depth Gauge with hook
Part No: MS-535, 540 & 542 Series
Doc V:
1.0
1. Insert the key into the battery cover.
2. Twist to unlock. DO NOT use
excessive force.
3. Lift out the battery cover.
4. Remove the battery.
(A magnet tip tool can
be used)
5. Locate the side spring battery contact.
6. Insert the replacement battery with
its edge against the side battery contact.
7. Press down on the opposite edge.
8. Locate the two lugs on the battery
cover with the two slots on the Depth
Gauge. Insert the battery cover.
9. Twist to lock. DO NOT use excessive
force.
1
2
6
7
8
3
4
5
Battery Replacement
1.
Base
2. Reading head
3. Locking screw
4. LCD display
5.
Data port
6. Beam
7. Battery cover
8. Function buttons
9. Hook
1
9
Thickness:
2mm
2
3
8
6
7
4
5
9
