NI 7330 User Manual and Specifications
© National Instruments
|
G-5
K
k
kilo—the standard metric prefix for 1,000, or 10
3
, used with units of
measure such as volts, hertz, and meters.
K
kilo—the prefix for 1,024, or 2
10
, used with B in quantifying data or
computer memory.
L
LIFO
last-in, first-out
limit switch/
end-of-travel position
(input)
Sensors that alert the control electronics that physical end of travel is
being approached and that the motion should stop.
M
m
meters
MCS
move complete status
microstep
The proportional control of energy in the coils of a Stepper Motor that
allow the motor to move to or stop at locations other than the fixed
magnetic/mechanical pole positions determined by the motor
specifications. This capability facilitates the subdivision of full
mechanical steps on a stepper motor into finer microstep locations that
greatly smooth motor running operation and increase the resolution or
number of discrete positions that a stepper motor can attain in each
revolution.
modulo position
Treat the position as within the range of total quadrature counts per
revolution for an axis.