![background image](http://html.mh-extra.com/html/national-instruments-corporation/scxi-1162/scxi-1162_user-manual_710253023.webp)
Chapter 2
Configuration and Installation
© National Instruments Corporation
2-7
SCXI-1162 User Manual
Table 2-1. Digital Signal Connections, Jumper Settings
Jumper
Description
Configuration
W1
W1
W2
W2
W3
W3
W4
W4
W5
W5
W6
W6
W6
Factory setting–Drives only 24 lines when W2 is set
to PAR. Used with DIO-24
Drives all 32 rear connector data lines when W2 is
set to PAR. Used with DIO-32F or DIO-96
Factory setting–Configures rear connector for serial
communication
Configures rear connector for parallel
communication. DIO board only
Factory setting–Configures rear connector for a DIO
board
Configures rear connector for an MIO board.
Includes MIO series, Lab series, and PC-LPM-16
Factory setting–Configures rear connector for a DIO
board
Configures rear connector for an MIO board.
Includes MIO series, Lab series, and PC-LPM-16
Parking position
Factory setting–Connects pullup to SERDATOUT
Parking position–Removes MISO from
SERDATOUT line
Connects MISO to SERDATOUT on an MIO-type
board. Includes MIO series, Lab series, and
PC-LPM-16
Factory setting–Connects MISO to SERDATOUT
on a DIO-type board
24
32
•
•
•
24
32
•
•
•
SER
PAR
•
•
•
SER
PAR
•
•
•
DIO
MIO
•
•
•
DIO
MIO
•
•
•
DIO
MIO
•
•
•
DIO
MIO
•
•
•
A
B
•
•
•
A
B
•
•
•
•
•
•
•
MIO
DIO
PAR
•
•
•
•
MIO
DIO
PAR
•
•
•
•
MIO
DIO
PAR