National Electronics & Watch Co,. Ltd.
BC10
ALARM mode
Setting the ALARM:
Press S7 from
TIMER
mode to enter
ALARM
mode. The watch will display the alarm view.
Press and hold S11 until the Alarm digit starts to blink. Press S1/S11 to select the Alarm 1 to 5.
Press S3 to set the Hour, Minute, Time (T1/T2) and Alarm (On/Off).
Alarm setting in SET mode:
•
Select
ALARM
by pressing S1 or S11 and then press S5 alarm digit is flashing.
•
Select
ALARM 1
to
ALARM 5
by pressing S1 or S11 and then press S5 to enter.
•
Set the
HOUR.
Press S1 or S11 to change values. Press S5 to enter
•
Set the
MINUTE
. Press S1 or S11 to change values. Press S5 to enter
•
Set the alarm time referred to
T1
or
T2
. Press S1 or S11 to change. Press S5 to enter
•
Set the alarm
ON
or
OFF
. Press S1 or S11 to change. Press S5 to enter
•
Set the Chime
ON
or
OFF
. Press S1 or S11 to change. Press S5 to enter
•
Press S7 to exit alarm setting
SET mode
Press S7 from
ALARM
mode to
SET
mode. 1.5 seconds later the watch will display the setting
options. The ff. sequence are as follows;
AUTO LAP, TIME, UNIT
,
USER
,
HRM,
HRM LINK,
NIGHT,
CONTRAST, CHIME, ALARM and TIMER
. Press S5 to enter selected option to set.
Press S1/S11 to select then press S5 to enter. Press S7 to exit setting to Time mode.
Setting the Auto Lap:
Press S5 to set AUTO LAP. Then press S1 or S11 to select Auto lap setting options (0.4, 1,
2, 3, 4, 5 and OFF). Press S5 to enter the selected setting. Press S7 to exit setting.
Note:
Alert sub-mode, press S5 to enter ALERT function. When alert is set to
ON
, there will be
a beep sound during taking auto lap. When it is set to
OFF
, there is no beep sound.
SETTING THE TIME:
TIME 1 setting:
You have two options in setting the watch,
GPS
or
MANUAL
. In manual setting, you can
manually set the time. If you select the GPS option, the watch will be automatically set based
on the data and time data from GPS satellites.
•
Select TIME by pressing S1/S11 and then press S5 to enter.
•
Select GPS or MANUAL setting by pressing S1/S11 and then press S5 to enter.
GPS
setting:
¾
Select TIME ZONE by pressing S1/S11 and press S5 to enter.
¾
Select DST ON or OFF by pressing S1/S11 and press S5 to enter.
¾
Select 12H/ 24H format setting by pressing S1/S11. Press S5 to enter.
¾
Select M-D/ D-M format by pressing S1/S11 and press S5 to enter.
¾
The watch will go back to Time.
MANUAL
setting:
¾
Set the
HOUR
by pressing S5 and press S1/S11 to change digit then press S5 to enter.
¾
Set the
MIN
by pressing S5 and press S1/S11 to change digit then press S5 to enter.
¾
Set the
SEC
by pressing S5 and press S1/S11 to change digit then press S5 to enter.
¾
Set the
YEAR
by pressing S5 and press S1/S11 to change digit then press S5 to enter.
¾
Set the
MONTH
by pressing S5 & press S1/S11 to change digit then press S5 to enter.
¾
Set the
DATE
by pressing S5 and press S1/S11 to change digit then press S5 to enter.
¾
Set the
12/24H
by pressing S5 and press S1/S11 to change digit then press S5 to enter.
¾
Set the
M-D/ D-M
format by pressing S1/S11 to change the press S5 to enter.
¾
The watch will go back to Time.
TIME 2 setting:
You have two options in setting the watch,
AUTO
or
MANUAL
. In manual setting, you can
manually set the time. If you select the AUTO option, the watch will be automatically set base
on the data and time data from GPS satellites.
The procedure in setting time 2 is the same with time 1 setting.
Setting the UNIT:
Press S5 to enter. Press S1 or S11 to select KM or Mi. Press S5 to confirm.
Setting the User’s information:
Press S5 when the USER option is highlighted. The sequence of setting is as follows: Gender
Æ
Age
Æ
Weight
Æ
Height Press S1 or S11 to change values. Press S5 to set next parameter.
Press S7 to exit.
Setting the HRM:
Press S5 to enter. Press S1/S11 to select HRM zones. Then press S5 again to set Low and
High limit of the zone. Press S1/S11 to manually change the value. Press S5 to confirm setting.
Press S7 to exit setting.
Note: User has also an option to ON or OFF the zone Alarm.
HRM LINK:
Press S5 to enter HRM LINK mode. It will then start to search (within 1 min) for HR belt and If
a new HR belt is found, it will display the HR belt ID number. If HRM link fails, after 1 minute of
searching, the watch will display “HRM LINK FAIL”.
Setting the DISPLAY (LCD contrast):
Press S5 to enter. Press S1 or S11 to change the setting. Press S5 to confirm setting.
Setting the Chime:
Press S5 to enter. Press S1 or S11 to select ON or OFF. Press S5 to confirm setting.
Note:
