National Electronics & Watch Co,. Ltd.
BC10
View 9
Æ
CHRONO/ HRM/ Altimeter
View 10
Æ
CHRONO/ HRM/ In-zone
ALTIMETER mode
Press S7 from HRM mode to enter ALTI mode. The watch will display the following in
succession:
Æ
SEARCH GPS
Æ
BATTERY
level
Æ
DATA TRACK MEMORY
Æ
view 1
of ALTI mode.
If the GPS is already
ON
when you enter the ALTI mode, the watch will prompt “GPS GO,
PACE and the CHRONO time blinks.
Press S1 to start/re-start/stop. Press S11 to save or press and hold S1 to save.
Different views in ALTI mode:
Following are the various views that user can choose by pressing S5.
View 1
Æ
GPS GO/ CHRONO/ Pace
View 2
Æ
CHRONO/ ALTI / Distance
View 3
Æ
ASC+/ ALTI / DSC-
RUN DATA mode
Press S7 from
CHRONO
mode to enter
RUN DATA
mode. The watch will display the Data list
view. In this view you can see how many files are saved in RUN data. The watch will show the
list of data files with newest on the top of the list.
1. Press S1 to scroll thru the list.
2. Press S5 to enter the selected data file. .
3. Press S5 again to view the ff. details of the data file:
•
Start Time / End Time / Distance
•
CHRONO / Distance / Calorie
•
CHRONO / Ave Pace / Max Pace
•
CHRONO / Ave Speed / Max Speed
•
In zone / Ave HR / Max HR (this view is hidden if HRM is OFF)
•
CHRONO / ASC+ / DSC-
•
Lap 1 / Lap time / Distance
•
Lap
2
…etc….
•
View / Del / Del All
4. Press S7 to exit
Deleting Data:
Press S7 from CHRONO mode to Run DATA mode.
After
the
Data file appears, press
S1 or S11 to select data files. Press S5 to enter selected file and it will appear “Start time/End
time/ Distance” view. Press S1 or S11 to change views. Also note that in any sub-views, press
and hold S5 to enter the “VIEW / DEL / DEL ALL” screen. Press S1 to select. If “View” is
selected, you can view the details of the data. If “Del” is selected, 1 data will be deleted. If “Del
All” is selected, all data files will be deleted. Press S7 to exit.
Data numbering system/ Legend:
Following is the data numbering system.
Sample data number:
D-
01
10
29-
2
01-
G
D
– means Data
01
–
Data number
10
- Month
29
- Day
2
- Data is referred to Time 2 or 1 for Time 1
01
- File number of the day
G
- Data from GPS
TIMER mode
Setting the TIMER:
Press S5 to select the interval timer “SEG 1 to 6”. Press and hold S11 until the Timer digit
starts to blink. Press S5 to set the hour, minute & second. Press S1/S11 to increase or
decrease the value. Press S7 to set/exit setting. Press S1 to start or stop. Press S1 again to
restart. Press and hold S1 or press S11 to save/reset.
Note: User can only review the Timer Data in the PC after the watch data is downloaded to the
PC.
