National Electronics & Watch Co,. Ltd.
BC10
TIME/NIGHT/CONTRAST/CHIME setting in Time mode:
Press and hold S11 until the “TIME” blinks. Press S1 or S11 to select any of the sub views:
TIME, NIGHT, CONTRAST and CHIME setting. Press S5 to enter selected sub-views. Press
S1 or S11 to change the value. Press S5 again to confirm. Press S7 to exit setting.
TIME 1 setting in SET mode:
You have two options in setting the watch,
GPS
or
MANUAL
. In manual setting, you can
manually set the time. If you select the GPS option, the watch will be automatically set based
on the data and time data from GPS satellites.
•
In SET mode, press S1 for Time setting
•
Press S5 and Time 1 appears.
•
Press S1 or S11 for Time 1 or Time 2 setting
•
Press S5 to confirm
•
Select
GPS
or
MANUAL
setting by pressing S1 or S11 and then press S5 to enter.
GPS
setting:
¾
Select
TIME ZONE
by pressing S1 or S11 and then press S5 to enter.
¾
Select
DST ON
or
OFF
by pressing S1 or S11 and then press S5 to enter.
¾
Select 12H or 24H format setting by pressing S1 or S11. Press S5 to enter.
¾
Select M-D or D-M (Month/Day or Day/Month) format setting by pressing S1 or S11.
Press S5 to enter.
MANUAL
setting:
¾
Set the
HOUR
by pressing S1 or S11 and then press S5 to enter.
¾
Set the
Minute
by pressing S1 or S11 and then press S5 to enter.
¾
Set the
SECOND
by pressing S1 or S11 and then press S5 to enter.
¾
Set the
YEAR
by pressing S1 or S11 and then press S5 to enter.
¾
Set the
MONTH
by pressing S1 or S11 and then press S5 to enter.
¾
Set the
DATE
by pressing S1 or S11 and then press S5 to enter.
¾
Set the
12/24H
by pressing S1 or S11 and then press S5 to enter.
¾
Select
M-D or D-M
(Month/Day or Day/Month) format setting by pressing S1 or S11.
Press S5 to enter.
TIME 2 setting in SET mode:
You have two options in setting the watch,
GPS
or
MANUAL
. In manual setting, you can
manually set the time. If you select the GPS option, the watch will be automatically set base on
the data and time data from GPS satellites.
The procedure in setting time 2 is the same with time 1 setting.
12H/24H format setting:
You can select
12H
or
24H
format. Press S5 to enter setting mode. Press S1 or S11 to select
12H or 24H format. Press S5 to confirm.
EXERCISE modes
The watch has the following major exercise modes:
RUN, CHRONOGRAPH
and
HRM
modes.
After setting the watch, the user can now start doing the various exercise modes.
RUN mode:
Press S1 or S7 from
TIME
mode to enter
RUN
mode.
Æ
SEARCH GPS
Æ
BATTERY
level
Æ
DATA TRACK MEMORY
Æ
view 1
of
RUN
mode.
Also note that if the GPS is already
ON
when you enter the RUN mode, the watch will prompt
“GPS GO, PACE and the CHRONO time blinks.
If the power level of the battery is low, the GPS cannot be turned on. The watch will display
BATT. LOW.
AUTO LAP/UNIT/USER setting in RUN mode:
Press and hold S11 until the “AUTO LAP” blinks. Press S1 or S11 to select any of the sub
views: AUTO LAP, UNIT and USER setting. Press S5 to enter selected sub-views. Press S1
or S11 to change the value. Press S5 again to confirm. Press S7 to exit setting.
RUN
mode Views:
Note while CHRO is running, press & hold S5 will allow the User to
change middle views (DISTANCE, PACE, SPEED, HRM, CALORIE, CLOCK, ALTI and
CHRONO).
Following are the various views that user can choose by pressing S5.
Example (DISTANCE views):
View 1
Æ
CHRONO/ Distance / Pace
