National Electronics & Watch M11-1913D User Manual Download

Page: 6 / 12

National Electronics & Watch Co,. Ltd.

BC10

CHRONO/ Distance / Speed

CHRONO/ Distance / HRM (this view is hidden if HRM is OFF).

CHRONO/ Distance / Calorie

CHRONO/ Distance / Clock

CHRONO/ Distance / ALTI

CHRONO/ Distance / CHRONO

CHRONO/ Distance / Distance

Note:

•

While in Run mode, then the GPS signal suddenly becomes weak or lost for any

reason, the watch will display LOST GPS SIGNAL until it receives GPS signal
again.

•

When the timer is stopped or reset in RUN mode, the GPS will automatically turn

OFF after 15 minutes to save battery power.

CHRONOGRAPH mode:

Press S7 from

RUN

mode to enter

CHRONOGRAPH

mode. The watch will display the

following in succession:

SEARCH GPS

BATTERY

level

DATA TRACK MEMORY

view 1

CHRONOGRAPH

mode.

Also note that if the GPS is already

when you enter the RUN mode, the watch will prompt

“GPS GO, PACE and the CHRONO time blinks.

Different views in CHRONOGRAPH mode:

Following are the various views that user can choose by pressing S5.

GPS GO/ CHRONO/ PACE

LAP/ CHRONO / HRM (this view is hidden if HRM is OFF)

LAP/ DISTANCE / CHRONO

LAP 1/ CHRONO/ CHRONO

When the timer is stopped or reset in Chronograph mode, the GPS will automatically turn
OFF after 15 minutes.

HRM mode:

Press S7 from

CHRONOGRAPH

mode to enter

HRM

mode. The watch will display the

following in succession:

SEARCH GPS

BATTERY

level

DATA TRACK MEMORY

view 1

HRM

mode.

Run

mode and

HRM

mode has the same timer. When the timer is started or stopped in RUN

mode, the same thing happens in

HRM

mode.

If the power level of the battery is low, the GPS cannot be turned on. The watch will display

BATT.LOW

HRM setting in HRM mode:

Press and hold S11 until the “HRM” blinks. Press S1 or S11 to select any of the sub views:
HRM LINK and HRM setting. Press S5 to enter selected sub-views. Press S1 or S11 to
change the value. Press S5 again to confirm. Press S7 to exit setting.

Different views in HRM mode:

Following are the various views that user can choose by pressing S5.

GPS GO/ CHRONO/ Pace

CHRONO/ HRM/ Calorie

CHRONO/ HRM/ Distance

CHRONO/ HRM/ Pace

CHRONO/ HRM/ Speed

CHRONO/ HRM/ HRM

CHRONO/ HRM/ Calorie

CHRONO/ HRM/ Clock

Summary of Contents for M11-1913D













Search results

Summary of Contents for M11-1913D

Reviews:

Related manuals for M11-1913D

Brands by name

Popular brands

National Electronics & Watch M11-1913D, User Manual

Search results

Summary of Contents for M11-1913D

Reviews:

Related manuals for M11-1913D

Brands by name

Popular brands