Figure 18
Figure 19
Figure 20
WINDSHIELD INSTALLATION
Attach Brackets to Windshield, Figure 18
1. Install a Bracket (25) to the two Grommeted holes at
the upper inside edge of screen as shown in Figure 18.
Secure Bracket to Shield with Screw, Washer (27 and
28), and Nut (29).
(7/16” Box Wrench and 3/16” Hex
Key) Figure 18
Prepare Clamps
2. Install one Clamp Spacer (14), to the inside of each
Clamp (10).
Figure19
Install Clamps
3. Snap 3 Wraparound Clamps (10) on the top frame of
the vehicle. Orient the top clamps facing down and male
half (with embossed part number) toward the front of the
vehicle.
4. Snap 4 Clamps (10) on the side frame of the vehicle
as shown in Figure 20. Orient the clamps so that the
male half (with embossed part number) faces to the in-
side and is toward the front of the vehicle.
Figure 20
Place fasteners within reach of assembling
clamps.
5. Place Windshield on vehicle.
Figure 20
Install Bracket
to Inside of
Shield
28
25
26
27
29
10
14
National Cycle, Inc.
PO Box 158, Maywood, IL 60153-0158
P. 708-343-0400 F. 708-343-0625 / E. [email protected]
www.nationalcycle.com
©2016 National Cycle, Inc.
Page 9 of 13
10-118015-000 11/16
