background image

Assembly Instructions

and Owner’s Manual 

Description:

Quantum® Hardcoated Polycarbonate 

3D

UTV Windshield, 

Wash’n’Wipe™

Full Size  

Model: 

Honda Pioneer 500/700 

Part Number:

N30003

Installation Time:

90 min.

Thank you for purchasing a National Cycle product. Read these instructions carefully and thoroughly before beginning work.
Dealers, if installing this windshield for a customer, please give them this manual. It contains information needed to properly
maintain and use this product. 

Attention: 
Special notes and cautionary measures which can
prevent damage to the accessory or vehicle. 

Note: 
Tips for facilitation of operation, control and
adjustment, as well as maintenance work. 

CAUTION:

The maximum speed for trailering the vehicle with the windshield is 65 MPH minus headwind speed.

Always face windshield forward (in direction of travel) while carrying on truck or trailer. 

CAUTION:

Plasticizers from some new vehicle covers or other coverings that are made from PVC may damage your

windshield. Do not use a new cover for a few days. Remove it from its package and leave in the sun or other warm

location. Use caution when storing your vehicle covered with your windshield installed, to avoid gases from becoming

trapped under the cover. 

Do not clean polycarbonate in hot sun or high temperatures. Do not clean the screen with glass cleaners.

Certain chemicals, generally known as acidic hydrocarbons, are known to cause polycarbonate damage. Do not allow
brake fluid, alcohol, or strong solvents to contact the screen. 

RAIN REPELLENT: 

Do not use rain protective products made for glass. We recommend National Cycle’s 

RainZip®

(N1410-01) to help shed water in rainy weather.

Register your windshield online at www.nationalcycle.com 

National Cycle’s UTV Windshield 3-Year Limited Warranty 

National Cycle hereby warrants to the original registered owner of a National Cycle polycarbonate windshield
for a period of three years from the date of purchase against breakage. This limited warranty is expressly limited
to the replacement of the polycarbonate windscreen. This limited warranty does not include scratches, coating
failure, cosmetic wear and tear, replacement of hardware, or any consequential damages or expenses including

labor cost of installation, removal and/or replacement, inconvenience, inbound or replacement outbound freight expenses (outbound
freight must be paid in advance by cc or check) or damage to any other component of the vehicle or any other accessories. Certain
chemicals, generally known as acidic hydrocarbons, are known to cause polycarbonate damage and will not be covered under this
limited warranty. Please refer to the cleaning instructions supplied with your UTV Windshield.  

CLEANING AND MAINTENANCE

To clean the screen, wash with a clean soft cloth, plenty of warm water and if necessary, a non-abrasive soap such as
dishwashing liquid. Flannel or soft chamois make good cleaning cloths. 

Paint, glue residue or grease removal:

Moisten

cotton with naphtha or turpentine followed by a wash as above. 

Do not clean polycarbonate in hot sun or high temperatures. Do not clean the screen with glass cleaners. 

Do not allow brake fluid, alcohol, or strong solvents to contact the screen. 

RAIN REPELLENT 

Do not use rain protective

products made for glass. We recommend National Cycle’s 

RainZip®

(N1410-01) to help shed water in rainy weather.

National Cycle, Inc.

PO Box 158, Maywood, IL 60153-0158

P. 708-343-0400 F. 708-343-0625 / E. [email protected]   

www.nationalcycle.com

©2016 National Cycle, Inc.

Page 1 of 13

10-118015-000 11/16

Summary of Contents for Quantum Wash'n'Wipe N30003














Reviews: