6
Buzzer switch setting. Change to “On” or “Off” to control the buzzer sound.
Width Input setting. Change width input to Grams or Ounces. Grams will
display “0.” and Ounces will display “0.0”.
Diameter input setting. Change Diameter input to Grams or Ounces. Grams
will display “0.” and Ounces will display “0.0”.
Unbalance unit of measurement. “Gr” means the unit will display in grams.
“OS” means the unit will display in ounces.
Once you have found the system setting that you wish to change, press the
ENTER
key.
This will then allow you to change the system setting to fit your needs. For example, the
display will change to:
To Change this setting to off, push the
UP
or
DOWN
arrow. Once you have the setting
correct to fit your needs, press the
ENTER
button to return to the system settings main
menu. You can now use the
UP
or
DOWN
arrows to move to the next setting you wish
to change.
Once you have made all the system setting changes you need, press the
WHEEL
PARAMETERS INPUT AND SHIFT KEY
which looks like:
. This will
save your changes and return you to the original balancing screen. To exit the system
settings without saving your changes, press the
STOP
key.
If the above system settings instructions are not understandable, refer to following
diagram: