14
Now close the plastic hood and spin the wheel. If you have the guard control setting to
“On” then the wheel will spin when the hood is closed. If you have the guard control
setting is set to “Off” then you must push the
START
button to spin the wheel.
Let the wheel spin and come to a complete stop before opening the plastic hood. The
screen will then show the following:
Use your hand to rotate the tire until all 5 of the lights in the
OUTSIDE UNBALANCE
POINT
are on, as shown here:
Then place the 100gram or 3.5 Ounce weight that came with the machine at 12 0’clock
on the outside of the rim using the provided wheel hammer. 100 grams = 3.5 ounces so
either weight is ok. Remember that at anytime you can switch from Grams to Ounces
and back by just pushing the
C
button.
After placing the weight, close the hood and spin the wheel. The following screen will
appear:
Remove the weight from the outside of the rim. Use your hand to rotate the tire until all
5 of the lights in the
INSIDE UNBALANCE POINT
are on, as shown here:
Then place the 100gram or 3.5 Ounce weight that came with the machine at 12 0’clock
on the inside of the rim using the provided wheel hammer. 100 grams = 3.5 ounces so
either weight is ok. Remember that at anytime you can switch from Grams to Ounces
and back by just pushing the
C
button.
