17
As you can see, the wheel is still technically out of balance by .20 Ounces on both sides.
However, because I had the “least unbalance value setting” on .70 Ounces, the machine
ignored the remaining .20 ounces because it was less than .70 ounces.
.20 Ounces may or may not make a significant difference depending on the size of the
wheel and rim.
The
FINE
button function can be used in any of the balancing modes.
9. Static Mode
Press the
DYNAMIC/STATIC MODE KEY
to switch between Static and Dynamic
mode. In static mode, everything functions the same as in Dynamic mode. However in
Static mode you are only balancing the wheel by placing weight on the outside of the rim
instead of on both sides.
10. ALU1-3 modes
This mode is used for Rims that do not accept clip on weights on one side or both sides.
All parameters will be entered the same as in Dynamic mode. Please refer to the
STICKING AND CLAMPING WEIGHT POSITION INDICATOR
on the display
screen as wheel as the following diagram to show where to place the weights on the rim.
