NatComm FAXSWITCH 2, User Manual

Page: 9 / 20

Page 9 Natcomm
INSTALLATION FOR MULTI-STOCKET USE
When you use telephones on more than 1 telephone socket
Please refer to the diagram on page 10
INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN
The LINE IN port of
FaxSwitch 2
must be wired direct to the incoming
telephone line at your MASTER TELEPHONE SOCKET.
All of your telephones, including all telephones located on different
sockets must be wired direct from the LINE OUT port of
FaxSwitch 2
.
This is necessary to allow
FaxSwitch 2
to ring all telephones.
The Fax Device must be connected to the FAX MACHINE port of
FaxSwitch 2
. If the Fax Machine has more than 1 port, use the LINE
port.
This is normally accomplished by fitting a new telephone socket next to
your original telephone socket (or fitting a new telephone socket on top of
your original telephone socket). All telephone extensions are then
transferred to this second telephone socket.
Once this is done, the TELEPHONE LINE IN port of
FaxSwitch 2
is
then connected to the original telephone socket. The TELEPHONE LINE
OUT port of
FaxSwitch 2
is connected to the new telephone socket.
This procedure should be carried out by an ACMA approved
telephone cabling technician.
If ADSL or Caller ID is used on this line, refer to pages 15-16