NATCOMM Page 15
TROUBLESHOOTING AUDIO PLAYBACK
If your cannot hear ANYTHING or the volume needs adjusting:
a) Open ‘Windows Mixer’.
b) Adjust the slide bars for Volume and Line In (or Mic) until the correct level is
achieved.
c) Deselect any Mute settings that are ticked.
If you can only hear YOURSELF:
You need to exchange the telephone cable that connects into the HANDSET
CONNECTION port of your CRU3
This is because there are TWO different wiring configurations used in curly cord handsets
and the handset you are using uses the less common configuration.
One supplied cable is Black and has a white coded band on one end (this is the normal
cable). The other does not. You will need to use the alternative e supplied cable.
