Page 10
NATCOMM
USING CRS SOFTWARE
IMPORTANT NOTE:
The CRS Program is loaded by default into your Start Up folder. If you elect to not
have it installed in your Start Up folder, you will need to RUN the CRS program, each
time you start your computer (ie; you will need click the CRS icon on your desktop).
RECORDING CALLS
Recording of your telephone calls is STARTED
by pressing the Record icon on the CRS
software.
Recording of your telephone calls is STOPPED
by pressing the Stop icon on the CRS software.
Your recorded telephone calls are automatically converted to MP3 format. A selection
of MP3 conversion sampling rates are provided, which will allow you to select the most
appropriate balance between recording quality and memory used, for your application.
The default setting is usually adequate for most users (see pages 14-15 for further
details).
PLAYING RECORDED CALLS
After recording you can Play your recorded telephone calls by Using Windows Explorer or My
Computer to navigate to the Recordings File Save folder : \MP3 Store
Unless you have changed the Save folder already, the Default Folder for Windows XP
(or earlier) operating systems is :
C:\Program Files\RecordSoftware\MP3Store
(if you are using Windows XP or earlier)
If you are using Windows 7 or later, you will need to change the Destination Save Folder so
that you can easily access your Recorded Files (See Page 14).
Once you have located the .mp3 file recording, you should Double Click it so that your PC’s
Music Player will open, and then play this recorded call back through your speakers.
